6. MISC IO

This section contains parameters controlling the IVNT-03’s miscellaneous I/O channels. Reporting parameters can be found within the main “MISC IO” entry, while others are contained in two subordinate panels in the explorer navigation tree.

Reporting Parameters

These parameters allow you to control reporting related to miscellaneous I/O channels:

  • Report on Period: Enable this option and select a time interval to turn on periodic reporting.
  • Report GPS Coordinates: Check this box to enable GPS support.
  • Report on Change: Check the boxes of the channels for which you want detected value changes to trigger a report.
  • Analog Threshold: Set the analog threshold percentage value (default is 10%).

Initial Values

In this section you can select the operating mode of each I/O channel. Each can be set as a digital input, as a digital output that is initially off, or as a digital output that is initially on.

Advanced Analog Settings

The one option here allows you to control how often each channel is sampled.

Network Enables

This area provides more options for controlling the enabling and disabling of individual networks within the IVNT-03. The main display contains a scrollable list with checkboxes that can be set or unset to enable or disable each network. These are equivalent to the Enable checkboxes found in the parameter areas for the corresponding networks.

Enable Networks on Boot

Normally, the IVNT-03 will not acknowledge messages on a network unless it is online with that network or running a CoreMini script. When this option is enabled, the device always acknowledges frames on all enabled networks.

Enable All

Enables all networks. Note that this may include enabling networks that are mutually exclusive (such as SW CAN and LSFT CAN). If you use this option, be sure to disable networks that should be off, so the device remains in a valid configuration.

Disable All

Disables all networks.

Performance Tests / USB Performance

Under Performance Tests is a single area called USB Performance. Here you will find a test to check the performance of the IVNT-03’s USB connection. When Enable Performance Blast Test is checked, the IVNT-03 sends high-speed traffic over the USB connection to the PC.