The RAD-Comet2

Dual 10BASE-T1S and 100/1000BASE-T1 Network Interfaces

Contents:

• 1. Safety and Other Important Notices
• 2. Introduction and Overview
  • 2.1. RAD-Comet Variants
  • 2.2. Package Contents
  • 2.3. Device Overview
  • 2.4. Operational Overview and Use Cases
  • 2.5. Hardware Requirements
• 3. A Tour of RAD-Comet2 Hardware
  • 3.1. Label and Status Indicators
  • 3.2. Bootloader Mode
  • 3.3. TC10 - Automotive Ethernet Sleep/Wake-up
  • 3.4. MACsec
  • 3.5. Connector Interfaces
• 4. Software Setup
• 5. The neoVI Explorer Configuration Utility
  • 5.1. Starting and Using neoVI Explorer
  • 5.2. Interfacing with a device
  • 5.3. System Settings and Firmware Updates
  • 5.4. General Settings and Product Details
  • 5.5. CAN Network Settings
  • 5.6. LIN Network Settings
  • 5.7. Ethernet Tap & Media Converter Configurations
  • 5.8. PHY Configurations
  • 5.9. gPTP Time Synchronization
  • 5.10. ICS Time Sync
  • 5.11. Reporting
  • 5.12. Network Enables
  • 5.13. Performance Tests
  • 5.14. ISO 15765-2
• 6. Core Features
  • 6.1. Interfacing with Vehicle Networks
  • 6.2. CoreMini Scripting
  • 6.3. neoVI API
• 7. PHY Dashboard
  • 7.1. Opening the PHY Dashboard
  • 7.2. Register Access
  • 7.3. VSpy Operation
  • 7.4. Examples
  • 7.5. Common Clause 22 Registers
  • 7.6. Common Clause 45 Registers
• 8. Technical Specifications
  • 8.1. Ethernet Hardware Time Stamping
• 9. Errata
• 10. Support Contact Information
  • 10.1. USA Headquarters
  • 10.2. ICS International Offices