RAD-Galaxy
A Multi Active Tap, Media Converter and Network Interface for Automotive Ethernet and CAN FD
Contents:
- 1. Safety and Other Important Notices
- 2. Introduction and Overview
- 3. A Tour of RAD-Galaxy Hardware
- 4. Software Setup
- 5. Hardware Setup
- 6. The neoVI Explorer Configuration Utility
- 6.1. Starting and Using neoVI Explorer
- 6.2. Interfacing with a device
- 6.3. System Settings and Firmware Updates
- 6.4. General Settings and Product Details
- 6.5. CAN Network Settings
- 6.6. LIN Network Settings
- 6.7. Ethernet Port Configurations (1000BASE-T)
- 6.8. One Pair Ethernet Configurations (100BASE-T1)
- 6.9. gPTP Time Synchronization
- 6.10. Reporting
- 6.11. Network Enables
- 6.12. Performance Tests
- 6.13. Storage Disk
- 7. Core Features
- 8. Reference: Connector Pinouts and Cable Signal Mappings
- 8.1. RAD-Galaxy Connector Pinouts
- 8.2. RAD-Galaxy Ethernet Cable Adapter Connector Pinouts and Signal Mapping
- 8.3. 6.3 neoVI FIRE 2 Ethernet Cable Adapter Connector Pinouts and Signal Mapping
- 8.4. neoVI-OBD-1 Cable Connector Pinouts and Signal Mapping
- 8.5. neoVI-OBD-MULTI (Regular and Right Angle) Cable Connector Pinouts and Signal Mapping
- 8.6. neoVI FIRE/RED J1939 Cable Connector Pinouts and Signal Mapping
- 8.7. neoVI FIRE 2 OBD Cable with DoIP Support Connector Pinouts and Signal Mapping
- 8.8. Signal Flow Map for Attachment of RAD-Galaxy Ethernet Cable Adapter and neoVI FIRE 2 Ethernet Cable Adapter
- 8.9. Signal Flow Map for Attachment of RAD-Galaxy Ethernet Cable Adapter and neoVI FIRE 2 OBD Cable with DoIP Support
- 9. Device Dimensions
- 10. Support Contact Information
- Buy Now