5. RAD-IO2 module setup and connection to devices

You can configure the modules from your own software or the free JavaScript program.

5.1 Plug the RAD-IO2 directly into the PC or Mac running Windows or Linux.

5.2 Run the Free JAVASCRIPT application on your computer (see instructions in section 4), this will allow you to configure the device and will also allow module control and simple graphing program. If you like, you can program the modules from your own code as well.

5.3. If you are using the CAN HUB:

5.3.1 Disconnect the USB cable from the PC and the USB-C port on the RAD-IO2.

5.3.2 Connect the USB-C cable of CAN-HUB to the RAD-IO2, and connect the DB9 on the CAN-HUB to a CAN device.

5.3.3 Using whatever software you have (VSPY, your own, or a another companies), treat all data like CAN Data. For decoding see examples in section 4.

5.4 FIRE2/ION/VCAN-Industrial/RED2/Fire3/GigaStar

5.4.1 Disconnect the USB cable from the PC and connect it to the FIRE2/ION/VCAN-Industrial/RED2/Fire3/GigaStar.

5.4.2 Using the NEOVI channel in the Vehicle SPY software treat all data like CAN data for decoding. See examples in section 8.