RAD-Star 2
Contents:
1. Safety and Other Important Notices
2. Introduction and Overview
3. A Tour of RAD-Star 2 Hardware
4. Hardware and Software Setup
5. Device Configuration
6. Reference: Connector Pinouts
7. Support Contact Information
RAD-Star 2
»
RAD-Star 2
View page source
RAD-Star 2
¶
Active Tap, Media Converter and Network Interface for Automotive Ethernet and CAN FD
¶
Contents:
1. Safety and Other Important Notices
2. Introduction and Overview
2.1. Introduction
2.2. Package Contents
2.3. Operational Overview
2.4. Block Diagram
2.5. Summary of Key Features
2.6. Hardware and Software Requirements
3. A Tour of RAD-Star 2 Hardware
3.1. Case and Overall Design
3.2. Membrane LED Display and Keypad
3.3. Vehicle Network Interface Side Connectors
3.4. PC Interface Side Connectors
3.5. Included Cables and Cable Assembly
4. Hardware and Software Setup
4.1. Vehicle Spy and Driver Installation and Setup
4.2. Driver and API Support File Installation and Setup
4.3. Hardware Hookup Diagrams
4.4. Vehicle Network and Power Connections
4.5. PC Connection
5. Device Configuration
5.1. Starting and Using neoVI Explorer
5.2. System Settings and Firmware Updates
5.3. General Settings and Product Details
5.4. Standard CAN Networks (HS CAN and MS CAN)
5.5. One Pair Ethernet (BroadR) Automotive Ethernet Networks
5.6. Time Sync ICS Hardware
5.7. Network Enables
6. Reference: Connector Pinouts
6.1. BroadR-Reach Nano MQS Connector Pinout
6.2. DB-9 Conventional Network Interface Connector Pinout
7. Support Contact Information
7.1. USA Headquarters
7.2. ICS International Offices