7. Reference: Connector Pinouts and Cable Signal Mappings
This section contains complete pinouts for the connectors on the ValueLOG.
Note that the USB cable is industry standard and not covered here.
- ValueLOG breakout cable and pinout
Figure : ValueLOG breakout cable
- ValueLOG with OBD2 to 4x DB-9 Adapter Cable
This cable is designed to enhance the functionality and compatibility of ValueLOG by providing seamless connectivity between the tool and devices equipped with DB-9 ports. With the ValueLOG OBD2 to 4x DB-9 Adapter Cable, you can connect your ValueLOG to a wide range of devices, expanding its applications and maximizing its utility. Learn More about OBD2 to 4x DB-9 cable >> https://store.intrepidcs.com/product/OBD-4XDB9-CABLE
Figure : ValueLOG OBD2 to 4x DB9 Cable
OBD2 to 4x DB-9 Adapter Cable - Pinout
| OBD 2 | Signal | CAN 1 Pin # | CAN 2 Pin # | CAN 3 Pin # | CAN 4 Pin # | LIN / SWCAN |
| 1 | SW CAN | – | – | – | 7 | |
| 2 | – | – | – | – | 7 | – |
| 3 | DW CAN 4 H | – | – | – | – | – |
| 4 | – | – | – | – | – | – |
| 5 | GND | 3 | 3 | 3 | 3 | 3 |
| 6 | DW CAN 1 H | 7 | – | – | – | – |
| 7 | LIN 1 | – | – | – | – | 2 |
| 8 | – | – | – | – | – | – |
| 9 | DW CAN 2 H | – | 7 | – | – | – |
| 10 | DW CAN 2 L | – | 2 | – | – | – |
| 11 | DW CAN 4 L | – | – | – | 2 | – |
| 12 | DW CAN 3 H | – | – | 7 | – | – |
| 13 | DW CAN 3 L | – | – | 2 | – | – |
| 14 | DW CAN 1 L | 2 | – | – | – | – |
| 15 | – | – | – | – | – | – |
| 16 | VBATT | – | – | – | – | – |
- ValueLOG with OBD2 to J1939 Adapter Cable
This cable is specifically designed to facilitate effortless connection between ValueLOG and vehicles or equipment utilizing the J1939 protocol. Learn More about OBD2 to J1939 cable >> https://store.intrepidcs.com/product/OBD-J1939-CABLE
Figure : ValueLOG with OBD2 to J1939 Adapter Cable
OBD2 to J1939 Adapter Cable - Pinout
| OBD 2 | Signal | Pin |
| 1 | – | – |
| 2 | – | – |
| 3 | – | – |
| 4 | CAN_SHLD | E |
| 5 | Battery (-) GND | A |
| 6 | J1939 2 H (CAN 2 H) | C |
| 7 | – | – |
| 8 | – | – |
| 9 | J1939 2 H (CAN 2 H) | F |
| 10 | J1939 2 L (CAN 2 L) | G |
| 11 | – | – |
| 12 | – | – |
| 13 | – | – |
| 14 | J1939 2 L (CAN 2 L) | D |
| 15 | – | – |
| 16 | VBATT Battery (+) | B |
- ValueLOG with OBD2 to DB26 Adapter Cable
This versatile cable offers connectivity to devices equipped with DB26 ports, opening up a wide range of compatible systems and expanding the applications of the ValueLOG tool. Learn More about OBD2 to DB26 cable >> https://store.intrepidcs.com/product/OBD-DB26-CABLE
Figure : ValueLOG with OBD2 to DB26 Adapter Cable
OBD2 to 4x DB-26 Adapter Cable - Pinout
| OBD 2 | Signal | DB 26 Male Connector |
| 1 | SW CAN | 26 |
| 2 | – | – |
| 3 | DW CAN 4 H | 12 |
| 4 | – | – |
| 5 | GND | 10 |
| 6 | DW CAN 1 H | 14 |
| 7 | LIN 1 | 22 |
| 8 | ENET ACT | 25 |
| 9 | DW CAN 2 H | 16 |
| 10 | DW CAN 2 L | 6 |
| 11 | DW CAN 4 L | 2 |
| 12 | DW CAN 3 H | 17 |
| 13 | DW CAN 3 L | 7 |
| 14 | DW CAN 1 L | 4 |
| 15 | – | – |
| 16 | VBATT | 19 |
- OBD pinout
Figure : ValueLOG OBD Pinout
| 1 | SWCAN |
| 2 | NC |
| 3 | DWCAN 04 H / LAN RX P |
| 4 | CHA GND |
| 5 | SIG GND |
| 6 | DWCAN 01 H |
| 7 | LIN 1 |
| 8 | ETH ACT |
| 9 | DWCAN 02 H |
| 10 | DWCAN 02 L |
| 11 | DWCAN 04 L / LAN RX N |
| 12 | DWCAN 03 H / LAN TX P |
| 13 | DWCAN 03 L / LAN TX N |
| 14 | DWCAN 01 L |
| 15 | NC |
| 16 | VBAT |
- ValueLOG-L pinout
| 1 | NC |
| 2 | HS CAN FD + |
| 3 | HS2 CAN + |
| 4 | CHASSIS GND |
| 5 | SIGNAL GND |
| 6 | HS1 CAN + |
| 7 | NC |
| 8 | NC |
| 9 | MS1 CAN + |
| 10 | HS CAN FD - |
| 11 | HS2 CAN - |
| 12 | MS1 CAN - |
| 13 | NC |
| 14 | HS1 CAN - |
| 15 | NC |
| 16 | B+ PAAT |