neoVI Documentation
Documentation for Intrepid Vehicle Network Interface and Data Logger for CAN FD, LIN & Ethernet (DoIP/XCP) - neoVI FIRE 3, neoVI RED 2 and neoECU 22
- 1. Safety and Other Important Notices
- 2. Introduction and Overview
- 3. A Tour of neoVI Hardware
- 4. Hardware and Software Setup
- 5. Device Configuration
- 6. Core Feature Operation
- 6.1. Monitoring Conventional Vehicle Networks
- 6.2. Transmitting on Conventional Vehicle Networks
- 6.3. Fan, Temperature, and Location Reporting with neoVI
- 6.4. Interfacing to Automotive Ethernet (BroadR-Reach / 100BASE-T1)
- 6.5. Using the Ethernet Interface for DoIP and XCP
- 6.6. Using Miscellaneous I/O Channels
- 6.7. Standalone Logging
- 6.8. CoreMini Scripting
- 7. Advanced Features
- 8. Reference: Connector Pinouts and Cable Signal Mappings
- 8.1. neoVI’s Devices Connector Pinouts
- 8.2. DB26-1 CABLE ADAPTER (DB26HD-F TO DB-25M + DB-9M)
- 8.3. BREAKOUT CABLE (DB-26HD FEMALE TO 11X DB-9M + 2X BANANA PLUGS)
- 8.4. DB26-1 DoIP Cable (Red2, Fire3) [DB26-1-DOIP-CABLE]
- 8.5. GM Global A T-Harness [GA-CGM3]
- 8.6. Deutsch 9-pin (J1939 Type 1) Cable [J1939-FIRE-CABLE]
- 8.7. OBD Multi (Right Angle Connector) [NEOVI-OBD-MULTI-RIGHT]
- 8.8. OBD Multi Cable (Most OEMs) [NEOVI-OBD-MULTI]
- 8.9. GM Legacy Cable (Global A) [NEOVI-OBD-1]
- 9. Technical Specifications
- 10. Support Contact Information