Buy RAD-Gigastar

RAD-Gigastar

A dual 100/1000BASE-T1 Active Tap with optional CAN-FD/LIN/FlexRay and Data Logging

Contents:

• 1. Safety and Other Important Notices
• 2. Introduction and Overview
  • 2.1. Introduction
  • 2.2. Package Contents
  • 2.3. Device Overview
  • 2.4. Operational Overview and Use Cases
  • 2.5. Hardware Requirements
• 3. A Tour of Gigastar Hardware
  • 3.1. Label and Status Indicators
  • 3.2. Connector Interfaces
• 4. Software Setup
• 5. The neoVI Explorer Configuration Utility
  • 5.1. Starting and Using neoVI Explorer
  • 5.2. Interfacing with a device
  • 5.3. System Settings and Firmware Updates
  • 5.4. General Settings and Product Details
  • 5.5. Logger Settings (optional)
  • 5.6. Storage Disk (optional)
  • 5.7. SerDes
  • 5.8. CAN Network Settings
  • 5.9. LIN Network Settings
  • 5.10. Ethernet Port Configurations
  • 5.11. PHY Configurations
  • 5.12. gPTP Time Synchronization
  • 5.13. ICS Time Sync
  • 5.14. Reporting
  • 5.15. Network Enables
  • 5.16. Performance Tests
• 6. Core Features
  • 6.1. Interfacing with Vehicle Networks
  • 6.2. CoreMini Scripting
  • 6.3. neoVI API
• 7. PHY Dashboard
  • 7.1. Opening the PHY Dashboard
  • 7.2. Register Access
  • 7.3. VSpy Operation
  • 7.4. Examples
  • 7.5. Common Clause 22 Registers
  • 7.6. Common Clause 45 Registers
• 8. Technical Specifications
  • 8.1. RAD-Gigastar Technical-Specifications
  • 8.2. Ethernet Hardware Time Stamping
• 9. Support Contact Information
  • 9.1. USA Headquarters
  • 9.2. ICS International Offices
• Buy Now