Powering neoVI PRO

The neoVI PRO will remain operational from 4.5V to 32 V. The bus functions may not operate correctly under 6V or physical layer transceiver limits.

The neoVI PRO power supply is not designed to operate continuously (more than 30 seconds) under 8 V. It supports lower voltages so that Crank and Motor stalls common in the vehicle do not affect operation. Therefore, a 9V or higher power supply is recommended. No damage will occur to the neoVI PRO at any voltage under 32V.

You can power neoVI PRO from either the power jack or the db25 connector or both.