Application Note: VehicleScape Standalone Logging - Part 4: neoVI MOTE Setup
Application Note: VehicleScape Standalone Logging - Part 4: neoVI MOTE Setup
Once you have completed the setup for the Logger, go to the CoreMini Console using the Generate button in VehicleScape DAQ or through Tool --> Utilities --> CoreMini Console.
Figure 1 shows the CoreMini Executable Generator. Click on the neoECU (CAN) tab
(Figure 1: 
). With a neoVI or ValueCAN
device connected to the neoVI MOTE, click on the to program the neoECU/neoVI MOTE connected.
You will now need to locate the neoECU/neoVI MOTE by clicking the "Poll for neoECUs" button
(Figure 1: 
). Make sure that you
have the correct network selected to the left of this button. If you are using the provided cable
with the OBD-II to 25 Pin with 9 Pin offshoot you will choose HS CAN 3 from this drop down.
Next, set the CoreMini to Download to be Logger CoreMini. On the bottom left you will find the
"Send" (Figure 1: 
). Click this button
when you are ready to send the CoreMini to the device. If you wish to erase the CoreMini from the
device later you may do so by pressing "Clear" 
.
Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.
