Terminating a Dual Wire CAN
Network - neoVI
Main
Applies to
neoVI Blue, neoVI Red,
neoVI FIRE, neoVI Yellow,
and ValueCAN
Both the High Speed CAN and Medium Speed CAN channels require the ends of the CAN network to be terminated with a 120 ohm resistor.
Typically, if you are connecting to a existing CAN network these termination resistors will be present. If you are building a test network you may have to install these resistors.
neoVI Documentation - (C) Copyright 2000-2020 Intrepid Control Systems, Inc. |
Last Update: Thursday, July 09, 2009