|
VNETs |
VNETs are hardware modules developed for neoVI PLASMA that support different functionality for different needs.
Up to three VNETs are possible as shown in Figure 1.
A central FIRE VNET is required to control the outer two VNETs and also provides the DC power connection to neoVI PLASMA.
The outer slots can have any of the VNETs listed in Table 1.
Table 1: neoVI PLASMA VNETs
Last Update:
Thursday, February 07, 2013
Figure 1: neoVI PLASMA has 3 VNET connections along the bottom.
All VNETs are able to run their own scripts for data logging, simulation, or test execution.
Scripts run independently of other active VNETs.
Although they are independent, they record data with a single time stamp onto the neoVI PLASMA SD cards.
VNET
Description
FIRE
The master VNET that gives neoVI FIRE functionality and controls both slave VNETs.
This can also be used in either or both slave VNET slots.
AnalogIN
A slave VNET to measure and record analog inputs.
MOST
A slave VNET to work with the MOST 25 or MOST 50 networks.
MOST50
A slave VNET to work with the MOST 50 network.
FlexRay
A slave VNET to work with the FlexRay network.
neoVI PLASMA Documentation - (C) Copyright 2019 Intrepid Control Systems, Inc.