The AnalogIN slave VNET measures and records analog inputs.  This VNET must be installed in slot 1 for neoVI PLASMA.  This VNET must be enabled using the "Slave VNET A" settings in 3G Explorer shown in Figure 1.

Figure 1: The AnalogIN VNET must be enabled using these 3G Explorer "Slave VNET A" settings.

Pinout Diagram

AnalogIn VNET has a 26 pin male connector with the pinout in Table 1 and layout in Table 2. 

Table 1: AnalogIn VNET Pinout
(26 pin connector with 3 rows of pins)

Pin	Name		Pin	Name		Pin	Name
1	ADC_IN 1 +	10	GND	19	VBATT
2	ADC_IN 2 +	11	ADC_IN 1 -	20	ADC_IN 3 +
3	ADC_IN 3 -	12	ADC_IN 2 -	21	ADC_IN 4 -
4	ADC_IN 10 CHA	13	ADC_IN 4 +	22	NA
5	NA	14	ADC_IN 10 CHB	23	NA
6	NA	15	NA	24	NA
7	NA	16	NA	25	ADC_IN 5 -
8	ADC_IN 6 +	17	ADC_IN 5 +	26	ADC_IN 7 -
9	ADC_IN 7 +	18	ADC_IN 6 -

Table 2: AnalogIn VNET Pin Layout
(MALE 26 pin connector with 3 rows of pins)

	1		2		3		4		5		6		7		8		9
10		11		12		13		14		15		16		17		18
	19		20		21		22		23		24		25		26

neoVI PLASMA Documentation - (C) Copyright 2019 Intrepid Control Systems, Inc.

Last Update: Wednesday, December 04, 2013