Application Note: neoVI Logging neoECU DAQ

Introduction:

This application note will go over how to use a neoECU 10's analog inputs and send the data over HS CAN to a neoVI FIRE.  The neoVI FIRE will record the data via standalone mode using CoreMini.  In this example a neoECU 10 will be used, but with a few changes, any neoECU device can be used.


Files To Reference For This Example: 

Included in this AppNeoECULogging.zip file:

  1. ECUCoreMini.vs3
  2. FIRELogging.vs3

Hardware Required:

  1. neoECU
  2. neoVI capable of standalone mode.


Previous  |  Next

  Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.