Application Note: neoVI Logging neoECU DAQ - Part 1: neoECU Setup

Overview

In this section we will setup the CoreMini file that we will be loading into the neoECU, which is going to take 4 analog inputs that we will assign to signals in an HS CAN transmit message.  We will later log and decode these signals.

Process:

  1. Setup one HS CAN transmit messages, with 4 signals.
  2. Create a function block script that will set each signal value into an analog input.  Then transmit the messages.  For help working with the analog inputs on a neoECU 10, see the IO map for the neoECU 10.
  3. Save this file as (your name)ECUCoreMini.vs3
  4. Load this CoreMini into the neoECU device. (For help on this topic see the neoECU 10 Script loading.  If you are using a different neoECU device try this link.)


Previous  |  Next

  Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.