Graphical Panel Controls: Meter

Meter controls display data using a meter face.  The actual numeric value of the signal linked to the control is shown at the top, while the needle points to a representation of the current value in a manner similar to that of an automobile gauge (Figure 1). The range of displayed values is controlled through custom settings.


Figure 1: Two example Meter controls showing how data is displayed both numerically and graphically.

Table 1 lists the properties specific to the Meter control.  A list of common properties can be found under Common Control Properties.

Table 1: Meter Properties

Property Function and Options
Minimum Sets the bottom end of the range of values that can be displayed on the meter; lower signal values will "peg" the needle at the minimum value.
Maximum Sets the top end of the range of values that can be displayed on the meter; higher signal values will "peg" the needle at the maximum value.
NeedleColor Sets the color of the meter needle. Double-click to launch the Windows color picker dialog box.
Angle Specifies the span of the meter arc in degrees, from 30 to 180. Figure 1 shows an example of a 180 degree meter on the left and a 60 degree meter on the right.

  Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.