Part 7 - Conclusion

Overview

The following steps were taken to capture data.

1. Create a J1979 RPM Request.
2. Create a function block to log data.
3. Load the CoreMini to the hardware.
4. Extract the data.
5. Review the collected data.

This was meant to be a simple example. There is much more that can be done using CoreMini in supported hardware. A simple script Function Block can be created and used to simulate functions of an ECU or request diagnostic data. Captures can be configured to log during set conditions or inputs.

Previous  |  Next

  Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.