Script Type Function Block Command: Diag Job Action

Command Description

The Diag Job Action command allows a function block script to control diagnostic jobs created in the Diagnostics feature of Vehicle Spy.

Value Field Parameters

Double-click in the Value field to bring up a dialog box to set command parameters (Figure 1). There are two parameters to select: the action to take and the diagnostic job to work with.


Figure 1: Parameter dialog box for the Diag Job Action function block script command.

Action

Specifies the action that the script should take:

Diag Job

Allows you to select the diagnostic job that this command should act upon. The diagnostic jobs in the current Vehicle Spy setup will be listed in the white box; simply click on the one you want and then press the OK button.

The Find box allows you to more easily locate the right job in large setups. Type a string in the box to filter the list of diagnostic jobs shown in the selection box, so that only those that match the entered string appear. Press Clear to resume showing all diagnostic jobs again.


  Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.