Function Blocks Types
Vehicle Spy supports three types of Function Blocks:
- Script Type: Lets you write a program consisting of a set of command steps that control the operation of Vehicle Spy. You can use messages and
signals as part of the script; for example, you could write a script to transmit a set of messages in response to receipt of an Engine RPMmessage. These are often called
function block scripts.
- Capture Type: Captures messages and signals and logs them to a file, based on parameters you select. The recorded file can be used for playback,
simulation or analysis. This function block type is also known as a capture block.
- Playback Type: Allows a data file to be played back through hardware. This is a quick way to set up a simulation for a node or vehicle. This type of
function block is also called a playback block.
The type of block is selected at the time it is added by clicking the button at the far left of the
toolbar. There you will see a small submenu appear, as shown in Figure 1, showing the three types. After you select the type of function block you want to
create, it will be added to the Function Block List.
The type of function block chosen determines what is found in the setup area that comprises most of the function block window.
Figure 1: Add Function Block submenu.
Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.