ValueCAN 3
Vehicle Side Connections
Main
Applies to
ValueCAN
The ValueCAN 3 has a standard 9 pin CAN Connection. This pin-out is in Table 1.
Note that the ValueCAN 3 connector pin-out is also diagrammed on the top sticker of the device.
Table 1 - The ValueCAN 3 Connector Pin Descriptions
Pin | Name | Description |
1 | Trigger Pin | Miscellaneous Signal 1 |
2 | CAN 1 Low | High Speed CAN Low |
3 | GND | Electrical Ground |
4 | CAN 2 Low | High Speed CAN Low |
5 | GND (Shield) | Shield |
6 | GND | Electrical Ground |
7 | CAN 1 High | High Speed CAN High |
8 | CAN 2 High | High Speed CAN High |
9 | VBatt | Electrical Positive Supply 6.5-40 VDC |
Vehicle interface connectors can be purchased for the ValueCAN 3. For a complete list please see Intrepid Control Systems website. The tables below describe two of the commonly used cables for the ValueCAN 3.
Figure 1 - The OBD-II / J1962 Connector Vehicle
End View
Table 2 - The ValueCAN 3 OBDII Connector Pin Description
Pin OBDII | Pin ValueCAN 3 | Name |
6 | 7 | CAN 1 High |
14 | 2 | CAN 1 Low |
3 | 8 | CAN 2 High |
11 | 4 | CAN 2 Low |
16 | 9 | VBatt |
5 | 3 | GND |
4 | 5 | GND (Shield) |
Table 3 - The ValueCAN 3 J1939-RP1210 Connector Pin Description
Pin Vehicle | Pin ValueCAN 3 | Name |
1/A | 3 | Battery (-) Ground |
2/B | 9 | Battery (+) |
3/C | 7 | CAN_H |
4/D | 2 | CAN L |
5/E | 5 | CAN Sheld |
Figure 2 - The J1939-RP1210 Connector Vehicle End View
neoVI Documentation - (C) Copyright 2000-2020 Intrepid Control Systems, Inc. |
Last Update: Wednesday, January 09, 2013