RAD-Comet

10BASE-T1S and 100BASE-T1 Network Interface

Contents:

• 1. Safety and Other Important Notices
• 2. Introduction
  • 2.1. Package Contents
  • 2.2. Device Overview
  • 2.3. Operational Overview and Use Cases
  • 2.4. Hardware Requirements
• 3. A Tour of RAD-Comet Hardware
  • 3.1. Label and Status Indicators
  • 3.2. Connector Interfaces
• 4. Software Setup
• 5. The neoVI Explorer Configuration Utility
  • 5.1. Starting and Using neoVI Explorer
  • 5.2. Interfacing with a device
  • 5.3. System Settings and Firmware Updates
  • 5.4. General Settings and Product Details
  • 5.5. CAN Network Settings
  • 5.6. Ethernet Port Configurations
  • 5.7. PHY Configurations
  • 5.8. gPTP Time Synchronization
  • 5.9. ICS Time Sync
  • 5.10. Performance Tests
• 6. PHY Dashboard
  • 6.1. Opening the PHY Dashboard
  • 6.2. Register Access
  • 6.3. VSpy Operation
  • 6.4. Examples
  • 6.5. Common Clause 22 Registers
  • 6.6. Common Clause 45 Registers
• 7. Errata
• 8. Support Contact Information
  • 8.1. USA Headquarters
  • 8.2. ICS International Offices