Main Menu: Embedded Tools

The Vehicle Spy Embedded Tools main menu contains various tools for development as shown in Figure 1. Refer to Table 1 for a brief description of each selection.


Figure 1: The Vehicle Spy Embedded Tools main menu.

Table 1: Vehicle Spy Embedded Tools Menu

Embedded Tools Menu Selection Description
DPS Archive Viewer Opens a viewer for looking inside GM DPS archives. Note: GMLAN must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
CAN Terminal Opens CAN Terminal for ECU debugging.
J1939 Address Manager Opens an address manager for the J1939 network. Note: J1939 must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
J1939 DTC Monitor Opens a diagnostic trouble code monitor for the J1939 network. Note: J1939 must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
ISO14229 Flasher Opens a flash tool for Ford ISO14229 ECUs. Note: GGDS must be enabled on the Tools -> Options, Spy Networks tab to see this selection.
BitSmash Opens BitSmash tool to "smash" or corrupt a specified CAN frame. Requires ValueCAN 3, neoVI FIRE, or neoVI PLASMA hardware.

  Spy Documentation - (C) Copyright 1997-2022 Intrepid Control Systems, Inc.