The Spy Networks menu contains many common tasks as shown in Figure 1. Refer to Table 1 for a brief description of each selection.
Spy Networks Menu Selection | Description |
---|---|
Snapshot | Opens Snapshot view for quick and simple diagnostics. Note: GMLAN must be enabled on the Tools -> Options, Spy Networks tab to see this selection. |
Messages | Opens Messages view to monitor message traffic. |
Messages Editor | Opens Messages Editor for creating and viewing message and signal definitions. |
Tx Panel | Opens Tx Panel for transmitting messages. |
Networks | Opens Networks view to configure hardware and networks. |
TCP/IP | Opens TCP/IP view to allow for modification of a device's ethernet settings. |
FlexRay Controllers | Opens FlexRay Controllers view for configuring and modifying FlexRay controllers. |
FlexRay Cycles | Opens FlexRay cycles view. |
A2B Traffic | Opens A2B view which allows the monitoring and modification of Automotive Audio Bus traffic. |
Diagnostics | Opens Diagnostics view for launching diagnostic jobs and seeing their results. |
Diagnostics over IP (DoIP) | Opens DoIP view for sending Diagnostic jobs over IP. |
Simulator | Opens Simulator view for configuring a simulation from a database. |
ECUs | Opens ECUs view to setup diagnostic information for ECUs. |