Standalone Logging Message Collection Options |
In VehicleScape DAQ the Standalone Logging of a Messages collection has specific settings described in Table 1 and shown in Figure 1.
Table 1: Standalone Logging Message Collection Options
Message Collection Option | Description |
---|---|
Entire Bus | In this collection, log all messages from all networks. |
Selected Messages | In this collection, only log data selected on the Channels tab. |
Enable decimation | In this collection, log selected data at periodic rates defined in the Channels tab Priority column. |
Force a single decimation rate | In this collection, log selected normal mode data at a chosen periodic rate, regardless of how fast/slow it appears on the network. Diagnostic mode data rates are unaffected. |
Store on change only | In this collection, log selected data only if any data in its carrier message has changed. |
The following settings affect ALL Standalone Logging collections | |
Reporting Options | Options for physical logger feedback and Live Data reporting to a Wireless NeoVI website. |
Power Management | Logger sleep and wakeup selections are made here. |
Generate | Generates the final script and opens a dialog to send it to ICS hardware that supports standalone logging. |
Figure 1: The Standalone Logging Message Collection Options.
![]() |
Last Update: Friday, May 3, 2013