In VehicleScape DAQ the Standalone Logging of a Bus Query collection can log a snapshot of DID values and DTCs at one point in time from several ECUs at once.

Table 1 describes the settings in Figure 1 and some other settings that affect all collections.

Table 1: Standalone Logging Bus Query Settings

Bus Query Setting	Description
Base ECU	In this collection, use the DID definitions in this ECU to apply to the entire Bus Query.
Select ECUs	In this collection, log a bus query from these chosen ECUs.
Specify a Range	In this collection, log a bus query from all ECUs within a range of arbitration IDs on a chosen network.
Diagnostic ID of first/last ECU	In this collection, log a bus query from all ECUs within this range of arbitration IDs.
Network of ECUs	In this collection, log a bus query from all ECUs within a range of arbitration IDs on this network.
Select DIDs	In this collection, log a bus query of these chosen DIDs.
Read DTCs	In this collection, log all DTCs (diagnostic trouble codes) from all chosen ECUs if the DTC passes the Status Mask filter.
Read Extended/Snapshot Records	In this collection, include the DTC extended (ISO $19/06) and DTC snapshot (ISO $19/04) records.
Status Mask	In this collection, use this mask to filter which DTCs will get logged.
Read OBD II VIN and Calibration ID	In this collection, use J1979 mode $09 to log the VIN (PID $02) and engine control module calibration ID (PID $04).
Collection Start Options	For this collection, select when to start logging data.
Collection Configuration	For this collection, select when to stop logging data.
Restart Options	For this collection, select when to restart logging data.
neoVI PLASMA Collection Upload	For this collection, select when to upload data to a WirelessNeoVI server.
The following settings affect ALL Standalone Logging collections
Reporting Options	Options for physical logger feedback and Live Data reporting to a Wireless NeoVI website.
Power Management	Logger sleep and wakeup selections are made here.
Generate	Generates the final script and opens a dialog to send it to ICS hardware that supports standalone logging.

Figure 1: The Standalone Logging Bus Query settings.

neoVI PLASMA Documentation - (C) Copyright 2019 Intrepid Control Systems, Inc.

Last Update: Friday, May 3, 2013