Wireless Mode

One of the exciting ways to use neoVI PLASMA is in wireless mode* where it can be monitored and controlled remotely by a PC with the Wireless NeoVI website. 

How To Get neoVI PLASMA Into Wireless Mode

First, connect a PC to neoVI PLASMA through USB:

  1. Configure the firmware, RTC time, and network baud rates with neoVI 3G Explorer.
Next, on neoVI PLASMA by itself:
  1. Verify the antennas, SIM card, and SD Card #1 are installed.
  2. Connect the FIRE VNET to DC power and vehicle data bus networks.
  3. Verify the touch screen shows a successful start up of wireless.
Finally, on a PC by itself:
  1. Use Vehicle Spy to generate a VS3ZIP script file with desired power management.
  2. Use the Wireless NeoVI website Vehicle List to verify neoVI PLASMA is online.
  3. Use the website to send the VS3ZIP script from the PC to neoVI PLASMA.
  4. Use the website to control and monitor the neoVI PLASMA.
  5. Use the website to transfer archived data collected by neoVI PLASMA to the PC.

*Wireless mode has major advantages, but link speed and data usage should be considered too.

neoVI PLASMA Documentation - (C) Copyright 2019 Intrepid Control Systems, Inc.

Last Update: Monday, April 22, 2013